26
Installation
For details on how to use the menus, refer to the operating instructions for SRX-series
projectors.
On COLOR/FRAME Window
When you set either “Color Space”, “Color Temp”, or “Gamma” on
“Color” in the COLOR/FRAME window of the SRX Controller, the
desired setting will be written to the color space description area of the
EDID ROM.
Values to be written to the EDID ROM are shown below.
Signal Mode settings Input Signals
8bit Single Full
When used in normal. Signal level is DVI1.0, Full Range
compliant.
10bit Twin Full
When the 10-bit signal (10bit Twin mode) based upon Sony
unique specification is input. Signal level is Full Range
compliant.
10bit Single Full
When the 10-bit signal (10bit Single mode) based upon Sony
unique specification is input. Signal level is Full Range
compliant.
8bit Single Limited
When the DTV signal is input. Signal level is DVI1.0, Limited
Range compliant.
10bit Twin Limited
When the 10-bit signal (10bit Twin mode) based upon Sony
unique specification is input. The signal level is Limited Range
compliant.
10bit Single Limited
When the 10-bit signal (10bit Single mode) based upon Sony
unique specification is input. The signal level is Limited Range
compliant.
