Sony LE-SP6800 Series, Руководство по безопасности

Страница: 2 / 73

2
Before operating the instrument, please read this manual
thoroughly and retain it for future reference.
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
THIS APPARATUS MUST BE EARTHED.
Important Safety Instructions
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may
be impaired.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• When installing, place the unit on a sturdy, level surface.
• Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus that produce heat.
• Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
• Only use attachments/accessories specified by the
manufacturer.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged,
objects have fallen into the apparatus, does not operate
normally, or has been dropped.
When installing the installation space must be secured in
consideration of the ventilation and service operation.
• Do not block the ventilation slots at the rear panels, and
vents of the fans.
• Leave a space around the unit for ventilation.
• Leave more than 15 cm (6 in.) of space in the rear of the
unit to secure the operation area.
When the unit is installed on a bench, leave clearance of at
least 40 cm (16 in.) on the left and right, and 15 cm (6 in.) at
the front. It is recommended that 40 cm (16 in.) clearance be
left above the unit for performance and maintenance
considerations.
CAUTION
The supplied power cord is for use with this device only.
Do not use the cord with other devices.
Caution
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
This LE-SP6800 Spectral Cell Analyzer is classified as a
CLASS 1 LASER PRODUCT.
The CLASS 1 LASER PRODUCT label is located on the rear
panel.
Laser Properties
Excitation Laser Module
Wavelength : 488 nm
Emission duration : Continuous
Laser output power : 80 mW (max)
Wavelength : 638 nm
Emission duration : Continuous
Laser output power : 110 mW (max)
Wavelength : 405 nm
Emission duration : Continuous
Laser output power : 140 mW (max)
Standard : IEC60825-1 (2007)
Caution
The use of optical instruments with this product will increase
eye hazard.
Regulatory Information
For Research Use Only. Not for use in diagnostic or
therapeutic procedures.
For the customers in the U.S.A
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
For the customers in Canada
CAN ICES-3 (A)/NMB-3(A)
WARNING
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
English