![background image](http://html.mh-extra.com/html/sony/lbt-ztx7-compact-hi-fi-stereo-system/lbt-ztx7-compact-hi-fi-stereo-system_operating-instructions-manual_1329883045.webp)
45
GB
Ad
ditional Inf
o
rmation
Transferring is stopped before it is
finished.
• You are using an unsupported USB
devices. See “Compatible USB devices
with this system” (page 56) for the
supported device types.
• The USB device is not formatted
correctly. Refer to the USB device
operating instructions for how to
format.
• Turn off the system and remove the
USB device. Then, turn on the system.
If the USB device has a power switch,
turn the USB device off and then on
again after removing it from the system.
Then perform transferring again.
• If the transferring and erase operations
are repeated multiple times, the file
structure within the USB device
becomes complex. Refer to operating
instructions of the USB device on how
to remedy this problem.
Transferring to an USB device results
in an error.
• You are using an unsupported USB
device. See “Compatible USB devices
with this system” (page 56) for the
supported device types.
• The USB device was disconnected or
the power was turned off during
transferring. Delete the partially-
transferred file, and transfer again. If
this does not fix the problem, the USB
device may be broken. Refer to
operating instructions of the USB
device on how to remedy this problem.
• Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device off
and then on again after removing it from
the system. Then perform transferring
again.
Audio files or folders on the USB
device cannot be erased.
• Check if the USB device is write-
protected.
• The USB device was disconnected or
the power was turned off during the
erase operation. Delete the partially-
erased track. If this does not fix the
problem, the USB device may be
broken. Refer to operating instructions
of the USB device on how to remedy
this problem.
Are you using a supported USB
device?
• If you connect an unsupported USB
device, the following problems may
occur. See “Compatible USB devices
with this system” (page 56) for the
supported device types.
– The USB
device is not recognized.
– File or folder names are not displayed
on this system.
– Playback is not possible.
– The sound skips.
– There is noise.
– A distorted sound is output.
– Transferring stops before it is finished.
“Over Current” appears in the
display.
• A problem has been detected with the
level of electrical current from the
(
USB)
port. Turn off the system and
remove the USB device from the
(
USB)
port. Make sure there is no
problem with the USB device. If this
display pattern persists, contact your
nearest Sony dealer.
There is no sound.
• The USB device is not connected
correctly. Turn off the system, then
connect the USB device again and
check if “USB MEMORY” lights up in
the display.
Continued
l