![background image](http://html.mh-extra.com/html/sony/lbt-vr50/lbt-vr50_operating-instructions-manual_1329865055.webp)
55
Tape Deck
The tape does not record.
• No tape is in the cassette holder.
• The tab has been removed from the
cassette (see page 52).
• The tape has reeled to the end.
The tape does not record nor play, or there
is a decrease in sound level.
• The heads are dirty. Clean them (see page
53).
• The record/playback heads are
magnetized. Demagnetize them (see page
53).
The tape does not erase completely.
• The record/playback heads are
magnetized. Demagnetize them (see page
53).
There is excessive wow or flutter, or the
sound drops out.
• The capstans or pinch rollers are dirty.
Clean them (see page 53).
Noise increases or the high frequencies are
missing.
• The record/playback heads are
magnetized. Demagnetize them (see page
53).
Tuner
Severe hum or noise (“TUNED” or
“STEREO” flashes in the display).
• Adjust the antenna.
• The signal strength is too weak. Connect
an external antenna.
A stereo FM program cannot be received in
stereo.
• Press STEREO/MONO so “STEREO”
appears in the display.
If other problems not described
above occur, reset the system as
follows:
1
Unplug the power cord.
2
Plug the power cord back in.
3
Press
t
/CLOCK SET, ENTER, and
1/u
at the same time.
The system is reset to the factory settings. All
the settings you made, such as the preset
stations, clock, and timer are cleared. You
should set them again.
Содержание LBT-VR50
Страница 60: ...Sony Corporation Printed in Indonesia ...