35
1
Place CDs and close the front cover.
2
Insert a blank tape into deck B.
3
Press FUNCTION repeatedly until
“CD” appears in the display.
4
Press PLAY MODE repeatedly until
“PROGRAM” appears in the
display.
5
Press DISC SKIP (or D.SKIP on the
remote) to select a CD.
6
Turn the jog dial until the desired
track appears in the display.
7
Press PLAY MODE once.
The track is programmed. First “STEP”
and the programmed playing order
appear, then the total playing time
appears.
8
Repeat steps 5 through 7 to program
additional tracks to be recorded on
side A.
Skip step 5 to select tracks from the same
disc.
9
Press
P
on the remote to insert a
pause at the end of side A.
“P” appears in the display and the total
playing time resets to “0.00” in the
display.
Total playing time
The last programmed track
Recording CDs by
specifying the
track order
— Program Edit
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
This function cannot be used during playback
of VIDEO CDs with the PBC functions
(Ver.2.0).
3
12
2
11
13
5
4,7
6
1
p
CHECK
p
EDIT
Disc number
Track number Total playing time
P
continued
D.SKIP
Содержание LBT-VR50
Страница 60: ...Sony Corporation Printed in Indonesia ...
