6
Step 2: Setting the
time
You must set the time before using the timer
functions.
1
Press
t
/CLOCK SET.
The hour indication flashes.
2
Press /– to set the hour.
The clock uses the 12-hour system.
3
Press ENTER/NEXT.
The minutes indication flashes.
4
Press /– to set the
minutes.
5
Press ENTER/NEXT.
The clock starts.
Tips
• If you make a mistake, start over from step 1.
• To change the time while the power is on, do the
following:
1
Press
t
/CLOCK SET.
2
Press /– to select “SET CLOCK.”
3
Press ENTER/NEXT.
4
Perform steps 2 through 5 above.
Using the remote
You can use the shaded buttons shown below
to operate Sony TV.
To
Press on the remote
Turn the TV on or
TV POWER.
off
Switch the TV’s
TV/VIDEO.
video input
Change the TV
TV CH +/–.
channels
Adjust the volume
TV VOL +/–.
of the TV speaker(s)
Tips
• With normal use, the batteries should last for
about six months. When the remote no longer
operates the system, replace both batteries with
new ones.
• When you set the time, the demonstration is
deactivated.
To activate the demonstration again, press
DISPLAY/DEMO while the system is off.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
When carrying this system
Do the following to protect the CD
mechanism.
1
Press FUNCTION repeatedly until “CD”
appears in the display.
2
Hold down PLAY MODE and press
1
/
u
to
turn off the system.
Step 1: Hooking up the system
(continued)
3,5
1
2,4
TV CH +/–
TV/VIDEO
TV POWER
TV VOL +/–