![background image](http://html.mh-extra.com/html/sony/lbt-gv10av/lbt-gv10av_operating-instructions-manual_1329851038.webp)
38
Troubleshooting (continued)
“0:00” (or “12:00 AM”) flashes in the display.
• A power interruption occurred. Set the clock and
timer settings again.
The timer does not function.
• Set the clock correctly.
DAILY and REC do not appear when you press
the
c
/CLOCK SET button.
• Set the timer correctly.
• Set the clock.
The remote does not function.
• There is an obstacle between the remote and the
system.
• The remote is not pointing in the direction of the
system’s sensor.
• The batteries have run down. Replace the
batteries.
There is acoustic feedback.
• Decrease the volume level.
• Move the microphone away form the speakers or
change the direction of the microphone.
The color irregularity on a TV screen persists.
• Turn off the TV set once, then turn it on after 15
to 30 minutes. If the color irregularity still
persists, place the speakers farther away from the
TV set.
Speakers
“PROTECT” and “PUSH POWER” appear
alternately.
• A strong signal was input. Press
?/1
to turn off
the power, leave the system turned off for a
while, then press
?/1
again to turn on the power.
• Check the speaker cables in case “PROTECT”
and “PUSH POWER” appear alternately again
after you turn the system on.
Sound comes from one channel or unbalanced
left and right volume.
• Check the speaker connection and speaker
placement.
VIDEO CD/CD Player
There is no picture.
• Check that the player is connected correctly and
securely.
• Make sure you operate the TV correctly.
• Make sure you set the SYSTEM SELECT
correctly, according to your TV (color) system.
• Press FUNCTION repeatedly until “CD” appears
in the display.
An after image of the last picture remains on the
screen, or the picture is unclear.
• Press ACTIVE repeatedly until “ACTIVE OFF”
appears in the display.
The CD tray does not close.
• The VIDEO CD/CD is not placed properly.
The VIDEO CD/CD will not play.
• The VIDEO CD/CD is not lying flat in the disc
tray.
• The VIDEO CD/CD is dirty (see “Notes on
VIDEO CD/CDs ” on page 36).
• The VIDEO CD/CD is inserted label side down.
• The VIDEO CD/CD is moist.
Play does not start from the first track.
• The player is in program or shuffle mode. Press
PLAY MODE repeatedly until “PROGRAM,”
“ALL DISCS SHUFFLE,” or “1 DISC
SHUFFLE” disappears.
Tape Deck
The tape does not record.
• The tab has been removed from the cassette (see
“To save a tape permanently” on page 36).
• The tape has reeled to the end.
The tape does not record or play, or there is a
decrease in sound level.
• The heads are dirty (see “Cleaning the tape
heads” on page 37).
• The record/playback heads are magnetized (see
“Demagnetizing the tape heads” on page 37).
The tape does not erase completely.
• The record/playback heads are magnetized (see
“Demagnetizing the tape heads” on page 37).