![background image](http://html.mh-extra.com/html/sony/lbt-gpx555/lbt-gpx555_operating-instructions-manual_1329849026.webp)
model name [LBT-GPX555 / MHC-GPX888/GPX555]
[4-485-746-
11
(1)] GB
26
GB
filename[D:\NORM'S JOB\SONY HA\SO130059\LBT-
GPX555\4485746111_GB\06BAS.fm]
masterpage:Left
2
Press BLUETOOTH on the unit
to select
Bluetooth
function.
“BLUETOOTH” appears in the
display panel.
Note
If the system is connected to a
Bluetooth
device, press BLUETOOTH to disconnect
the
Bluetooth
device.
3
Hold down BLUETOOTH on the
unit for 2 seconds or more.
“PAIRING” flashes in the display
panel.
4
Perform the pairing procedure
on the
Bluetooth
device.
For details, refer to the operating
instructions of your
Bluetooth
device.
5
Select the model number of the
unit on the display of the
Bluetooth
device.
For example, select
“SONY:MHC-GPX888” (or
LBT-GPX555/MHC-GPX555).
If passkey is required on the
Bluetooth
device, enter “0000”.
6
Perform the
Bluetooth
connection on the
Bluetooth
device.
When pairing is completed and the
Bluetooth
connection is established,
Bluetooth
device name appears in the
display panel.
Depending on the
Bluetooth
device,
connection may start automatically
after pairing is completed.
You can check the
Bluetooth
device
address by pressing DISPLAY
repeatedly.
Notes
• You can pair up to 9
Bluetooth
devices. If the
10th
Bluetooth
device is paired, the oldest
paired device will be deleted.
• “Passkey” may be called “Passcode”, “PIN
code”, “PIN number” or “Password”, etc.,
depending on the device.
• The pairing standby status of the system is
canceled after about 5 minutes. If pairing is
not successful, repeat from step 1.
• While connected to a
Bluetooth
device, this
system cannot be detected and connection
cannot be established from another
Bluetooth
device which is never paired before.
• If you want to pair with another
Bluetooth
device, repeat steps 1 to 6.
To cancel the pairing operation
Hold down BLUETOOTH on the unit for
2 seconds or more until “BLUETOOTH”
appears in the display panel.
You can operate a
Bluetooth
device by
connecting the system and the
Bluetooth
device using AVRCP.
Check the following before playing
music:
– The
Bluetooth
function of the
Bluetooth
device is turned on.
– Pairing has been completed.
1
Press BLUETOOTH on the unit
to select
Bluetooth
function.
“BLUETOOTH” appears in the
display panel.
2
Establish connection with the
Bluetooth
device.
The last connected
Bluetooth
device
will be connected automatically.
Perform the
Bluetooth
connection
from the
Bluetooth
device if the device
is not connected.
Once the connection is established, the
Bluetooth
device name appears in the
display panel.
3
Press
N
to start playback.
Depending on the
Bluetooth
device,
– you may need to press
N
twice.
– you may need to start playing an
audio source on the
Bluetooth
device.
Playing music from a
Bluetooth
device
Содержание LBT-GPX555
Страница 47: ......