Sony KV-XA29K94, Руководство по обслуживанию

Страница: 8 / 106

–
8
–
KV
-XA29K94/XA34K94
RM-962
4
Using Your New TV
Using Your New TV
Getting Started
CAUTION
• Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
Step 1
Connect the antenna
If you wish to connect a VCR, see the Connecting a VCR diagram below.
Connecting a VCR
To watch the video input, press VIDEO (see page 12).
: Signal flow
or
Antenna cable (not supplied)
Antenna cable (not supplied)
Rear of TV
F connector
(not supplied)
To video and
audio outputs
To
S video output
Audio/Video cable
(not supplied)
: Signal flow
To S VIDEO
input
VCR
Antenna cable (not supplied)
To antenna
output
Rear of TV
VIDEO (yellow)
AUDIO-L (MONO) (white)
AUDIO-R (red)
To VIDEO IN
1, 2, or 3
S video cable
(not supplied)
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
R L
1 2 3
R L Y C
B
C
R
COMPONENT VIDEO(DVD) IN
AUDIO
VIDEO
VIDEO
IN
MONITOR
OUT
S VIDEO
To
8
(antenna)
Antenna
adapter
(supplied)
Antenna
adapter
(supplied)
5
Using Your New TV
Using Y
our New TV
1
1 2 3
2
3
AUTO PROGRAM
AUTO
PROGR
CABLE: ON
3
1
POWER
CH VOL
AUTO PROGR ADD/ERASE CABLE
Front panel
Notes
• If you connect a monaural AUDIO VCR, connect the yellow plug to
VIDEO (the yellow jack) and the black plug to AUDIO-L (MONO)
(the white jack).
• If you connect a VCR to the 8 (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• When both the S VIDEO and VIDEO IN 1 input are connected, the
S VIDEO input is automatically selected. To view the video input to
VIDEO IN 1, disconnect the S video cable.
• Do not connect video equipment to the VIDEO 3 INPUT jacks at the front
and VIDEO IN 3 (video input) jack at the rear of your TV at the same time;
otherwise the picture will not be displayed properly on the screen.
• When no signal is input from the connected video equipment, the TV
screen becomes blue.
Step 2
Insert the batteries into
the remote
Note
• Do not use old batteries or different types of batteries together.
Step 3
Preset the channels automatically
Tips
• To stop the automatic channel presetting, press MENU.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 10).
• The AUTO PROGR button on the remote works as the AUTO PROGR
button on the TV.