– 25 –
38
Adjusting Your Setup (MENU)
4
If you are not satisfied
with the picture and
sound quality, you may be
able to improve them by
using the FINE tuning
feature.
(1) Press
V
or
v
to select
FINE, then press
ENTER.
(2) Press
V
or
v
to select
MANUAL, then press
ENTER.
(3) Press either
V
,
b
,
v
, or
B
until the picture
and sound quality are
optimal, then press
ENTER.
The + or – icon on the
menu flashes while
tuning.
5
If the TV signal is too
strong and the picture is
distorted, you can adjust
the TV reception
sensitivity.
(1) Press
V
or
v
to select
SENS, then press
ENTER.
(2) Press
V
or
v
to select
LOW, then press
ENTER.
To return to the normal screen
Press MENU.
Notes
• The TV system (TV SYS) and the TV reception sensitivity (
SENS)
settings are memorized for each program number.
• If you preset a locked channel, that channel will be unlocked.
Changing the CH. PRESET setting (continued)
b
b
b
b
b
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
b
b
b
ENTER
ENTER
MANUA L PROGRAM
PR :
0 1
AU TO
T V S Y S : I
MANUA L
S ENS : H I G
VH F L OW
F I NE :
MANUA L PROGRAM
PR :
0 1
AU TO
T V S Y S : I
MANUA L
S ENS : H I G
VH F L OW
F I NE :
MANUA L PROGRAM
PR :
1 0
H I GH
T V S Y S : I
L OW
S ENS :
VH F L OW
F I NE : AU TO
39
Additional Information
Additional Information
Troubleshooting
If you have any problem while viewing your TV, please check the following
troubleshooting guide. If the problem persists, contact your Sony dealer.
Additional Information
continued
Possible cause
Symptom
Solutions
• Check the antenna cable and connection
on the TV, VCR, and at the wall. (page 4)
• Display the CH. PRESET menu and
select “MANUAL PROGRAM” to
preset the channel again. (page 37)
• Check the antenna type (VHF/UHF).
Contact a Sony dealer for advice.
• Adjust the antenna direction. Contact a
Sony dealer for advice.
• Try using a booster.
• Display the CH. PRESET menu and
select “MANUAL PROGRAM.” Then,
select “
SENS: LOW.” (page 38)
• Turn off or disconnect the booster if it is
in use.
• If the sound of all the channels is noisy,
display the CH. PRESET menu and
select the appropriate TV system (TV
SYS), then select “AUTO PROGRAM”
to preset the channels again. (page 36)
• If the sound of some channels is noisy,
select the channel, then display the CH.
PRESET menu and select the
appropriate TV system (TV SYS).
(page 37)
• Check the power cord, antenna, and the
VCR connections.
• Press
u
(power).
• Press
U
(main power) on the TV to turn
off the TV for about five seconds, then
turn it on again.
Snowy picture
Noisy sound
Distorted picture
Noisy sound
Good picture
Noisy sound
No picture
No sound
• The connection is loose or
the cable is damaged.
• The channel presetting is
inappropriate or
incomplete.
• The antenna type is
inappropriate.
• The antenna direction
needs adjustment.
• Signal transmission is low.
• Broadcast signals are too
strong.
• The TV system setting is
inappropriate.
• The power cord, antenna,
or VCR is not connected.
• The TV is not turned on.
