Sony KV-32LS65AUS, Руководство по обслуживанию, Страница: 9 / 70

- 9 -
11
EN
Menu System
SLEEP TIMER The
“Sleep Timer
” option in the
“Timer
” menu
allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: after selecting the option press
,
then press
or
to set the time period delay
(max. of 4 hours). •
While watching the TV, you can press the
button on the remote control to display the
time
remaining.
•
One minute before the TV switches itself into standby mode, the time remaining is displayed on the TV screen automatically.
AUTO TUNING The
“Auto Tuning
” option in the
“Set Up
”
menu allows you to automatically search for and store all available TV channels. To do this: after selecting the option, press and then proceed in the same way as in the steps 3 and 4 of the section
“Switching On the
TV and Automatically Tuning
” on pages 7
and 8. PROGRAMME SORTING The
“Programme Sorting
” option in the
“Set
Up
” menu allows you to change the order in
which the channels (TV Broadcast) appear on the screen. To do this: after selecting the option, press and then proceed in the same way as in step 5 b) of the section
“Switching On the TV and
Automatically Tuning
” on page 8.
Level 1
Level 2
Level 3 / Function
Picture Adjustment
Mode: Personal Contrast Brightness Colour Sharpness Hue Reset
OK
T
imer
Sleep
T
imer: Of
f
OK
T
imer
Sleep
T
imer: Of
f
OK
continued...
Picture Adjustment
Mode: Personal Contrast Brightness Colour Sharpness Hue Reset
OK
Set Up
Auto T
uning
P
rogramme Sorting
P
rogamme Labels
A
V P
reset
Manual P
ro
gramme P
reset
Det
ail Set Up
OK
Set Up
Auto T
uning
P
rogramme Sorting
P
rogamme Labels
A
V P
reset
Manual P
rogramme P
reset
Det
ail Set Up
OK
Picture Adjustment
Mode: Personal Contrast Brightness Colour Sharpness Hue Reset
OK
Set Up
Auto T
uning
P
rogramme Sorting
P
rogamme Labels
A
V P
reset
Manual P
ro
gramme P
reset
Det
ail Set Up
OK
Set Up
Auto T
uning
P
rogramme Sorting
P
rogamme Labels
A
V P
reset
Manual P
rogramme P
reset
Det
ail Set Up
OK
13
EN
Menu System
continued...
MANUAL PROGRAMME PRESET The
“Manual Programme Preset
” option in the
“Set Up
” menu allows you to:
a)
Preset channels or the VCR channel one by
one to the programme order of your choice. To do this:
1
After selecting the
”Manual Programme
Preset
” option, press
then with
Programme
option highlighted press
.
Press
or
to select on which
programme number you want to preset the channel. Then press
.
For a VCR, select programme number
“0
” only.
2
After selecting the
Channel
option, press
. Then press the number buttons to enter
directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press
or
to search for it. When you tune the
desired channel, press
OK
twice to store.
Repeat all the above steps to tune and store more channels.
b)
Label a channel using up to five characters. To do this: Highlighting the
Programme
option, press the
PROG +/-
button to select the
programme number with the channel you wish to name. When the programme you want to name appears on the screen, select the
Label
option and press
. Next press
o
r
to
select a letter, number or
“-
“ for a blank. Press
to confirm this character. Select the other
four characters in the same way. After selecting all the characters, press
OK
twice to store.
c)
Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the
best possible picture, however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the
AFT
option and press
. Next press
or
to adjust the fine tuning between -15 and +15.
Finally press
OK
twice to store.
d)
Skip any unwanted programme numbers when they are selected with the PROG +/- buttons. To do this: Highlighting the
Programme
option, press the
PROG +/-
button to select the
programme number you want to skip. When the programme you want to skip
appears on the screen, select the
Skip
option and press
. Next press
or
to select
Yes
. Finally press
OK
twice to confirm and store.
To cancel this function afterwards, select
“No
” instead of
“Yes
” in the step above.
e)
View and record scrambled channels when using a decoder connected to Scart
3
/
3
directly or through a VCR.
To do this: select the
Decoder
option and press
. Next press
or
to select
On
. Finally
press
OK
twice to confirm and store.
To cancel this function afterwards, select
“Off
” instead of
“On
” in the step above.
S
Level 1
Level 2
Level 3 / Function
Picture Adjustment
Mode: Personal Contrast Brightness Colour Sharpness Hue Reset
OK
Set Up
Auto T
uning
P
ro
gramme Sorting
P
ro
gamme Labels
A
V P
re
set
Manual P
ro
gramme P
re
set
Det
ail Set Up
OK
Set Up
Auto T
uning
P
rogramme Sorting
P
rogamme Labels
A
V P
reset
Manual P
rogramme P
reset
Det
ail Set Up
OK