Sony KV-32LS65AUS, Руководство по обслуживанию

Страница: 11 / 70

- 11 -
21
EN
Specifications
Additional Information
TV system: B Colour system: PAL SECAM, NTSC 3.58, 4.43 (only Video In) Channel Coverage: VHF:
C00-C05, C05A, C06-C09, C09A, C10-C12
UHF: C20-C69 CABLE: S02-S44 Picture Tube: Flat Display FD Trinitron WIDE: 32
” (approx. 82 cm. measured
diagonally) Rear Terminals
1/
1
21-pin Scart connector
including
audio/video
input, YUV input, TV
audio/video output.
2/
2
21-pin Scart connector
including audio / video input, YUV input, monitor audio/video output.
3
/
3
21-pin Scart connector
including audio / video input, S video input, selectable audio / video output.
audio outputs (Left/ Right) - phono jacks
S
Design and specifications are subject to change without notice. Ecological Paper - Totally Chlorine Free
Side Terminals
4
S Video input
– 4 pin DIN
4
video input
– phono jack
4
audio input
– phono jacks
headphones jack
Sound Output:
2 x 20 W (music power) 2 x 10 W (RMS)
Power Consumption: 130 W Standby Power Consumption: 0.3 W Dimensions (w x h x d) : approx. 892 x 565 x 584 mm. Weight: approx. 62.2 Kg. Accessories supplied: 1 Remote Control (RM-934) 2 Batteries (IEC designated) 1 Scart adaptor 2 Scart cables Other features: •
100 Hz picture, Digital Plus.
•
Teletext, Fastext, TOPtext (250 page TEXT
memory). •
Sleep Timer.
•
Dolby Virtual.
•
BBE.
•
PIP.
•
Auto Format.
S
22
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
Additional Information
If you continue to experience problems, have your TV serviced by qualified personnel. Never open the casing yourself.
Problem No picture (screen is dark) and no sound. Poor or no picture (screen is dark), but good sound. No picture or no menu information from equipment connected to the Scart connector. Good picture, no sound. No colour on colour programmes. Distorted picture. Distorted picture when changing programmes or selecting teletext. Picture slanted. Noisy picture when viewing a TV channel. No unscrambling or unstable picture whilst viewing a scrambled channel with a decoder connected directly to the Scart connector
3
/
3
.
Top bent picture when viewing a VCR Remote control does not function. The standby indicator
on the TV
flashes.
S
Solution •
Check the aerial connection.
•
Plug the TV in and press the
button on the front of
the
TV.
•
If the standby indicator
is on, press
TV
button on
the remote control.
•
Using the menu system, select the
“Picture
Adjustment
” menu and select
“Reset
” to return to the
factory
settings.
•
Check that the optional equipment is on and press the
button repeatedly on the remote control until the
correct input symbol is displayed on the screen.
•
Press the
+ button on the remote control.
•
Check that
“TV Speakers
” is
“On
” in the
“Detail Set Up
”
menu.
•
Check that headphones are not connected.
•
Using the menu system, select the
“Picture Adjustment
”
menu and select
“Reset
” to return to factory settings.
•
Check that you have not connected at the same time equipment to the connectors
A
and
B
(see illustration on
page 18).
•
Check that you have not connected at the same time equipment to
and
(see illustration on page 18).
•
Turn off any equipment connected to the Scart
connector on the rear of the TV.
•
Using the menu system, select the
“Picture Rotation
”
option in the
“Detail Set Up
” menu to correct the
picture
slant.
•
Using the menu system, select the
“Manual
Programme Preset
” menu and adjust Fine Tuning
(AFT) to obtain better picture reception.
•
Using the menu system, select the
“Noise Reduction
”
option in the
“Detail Set Up
” menu and select
“Auto
” to reduce the noise in the picture.
•
Using the menu system, select the
“Set Up
” menu. Then
enter to
“Detail Set Up
” option and set
“AV3 Output
” to
“TV
”.
•
Connect VCR only by tuning to programme number
“0
”
(see page 13) or via any
“AV input
” (see page 18).
•
Check that the Media Selector on the remote control is set to the device you are using (VCR, TV or DVD).
•
If the remote control does not operate the VCR or DVD even when the Media Selector has been set correctly. Enter the necessary code set as explained on
“Remote Control
Configuration for VCR/DVD
” chapter of this instruction
manual
.
•
Replace the batteries.
•
Contact your nearest Sony service centre.
G2
G3