background image

 Connecting Additional Equipment

Never block the slots and openings 
by placing the set on a bed, sofa, rug 
or other similar surface.

Never place the set in a confined 
space, such as a bookcase or built-in 
cabinet, unless proper ventilation is 
provided.

Do not place the set near or over a 
radiator or heat register, or where it is 
exposed to direct sunlight.

Power-Cord Protection

Do not allow anything to rest on or roll over the 
power cord, and do not place the set where the 

power cord is subject to wear or abuse.

Antennas
Outdoor Antenna Grounding

If an outdoor antenna is installed, follow the precautions 

below. An outdoor antenna system should not be located in 
the vicinity of overhead power lines or other electric light or 
power circuits, or where it can come in contact with such 

power lines or circuits. 

WHEN INSTALLING AN OUTDOOR ANTENNA 
SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP 

FROM CONTACTING SUCH POWER LINES OR 
CIRCUITS AS CONTACT WITH THEM IS ALMOST 

INVARIABLY FATAL.

Be sure the antenna system is grounded so as to provide some 
protection against voltage surges and built-up static charges. 

Section 810 of the National Electrical Code (NEC) in USA and 
Section 54 of the Canadian Electrical Code in Canada 

provides information with respect to proper grounding of the 
mast and supporting structure, grounding of the lead-in wire 

to an antenna discharge unit, size of grounding conductors, 
location of antenna discharge unit, connection to grounding 

electrodes, and requirements for the grounding electrode.

Antenna Grounding According to the NEC

Antenna Grounding According to the National Electrical 
Code, ANSI/NFPA 70.

Lightning

For added protection for this television receiver during a 
lightning storm, or when it is left unattended and unused 

for long periods of time, unplug it from the wall outlet and 
disconnect the antenna. This will prevent damage to the 

receiver due to lightning and power-line surges.

Service
Damage Requiring Service

Unplug the set from the wall outlet and refer servicing to 

qualified service personnel under the following conditions:

When the power cord or plug 
is damaged or frayed.

If liquid has been spilled 
into the set or objects have 
fallen into the product.

If the set has been exposed to 
rain or water.

If the set has been subject to 
excessive shock by being 
dropped, or the cabinet has 
been damaged.

If the set does not operate 
normally when following the operating 
instructions. Adjust only those controls 
that are specified in the operating 
instructions. Improper adjustment of 
other controls may result in damage and 
will often require extensive work by a 
qualified technician to restore the set to normal operation.

When the set exhibits a distinct change in 
performance — this indicates a need for service.

Servicing

Do not attempt to service the set yourself 

since opening the cabinet may expose you 
to dangerous voltage or other hazards. Refer 

all servicing to qualified service personnel.

Replacement Parts

When replacement parts are required, be 
sure the service technician certifies in 

writing that he has used replacement 
parts specified by the manufacturer that 

have the same characteristics as the 
original parts. Unauthorized 

substitutions may result in fire, electric 
shock, or other hazards.

Safety Check

Upon completion of any service or repairs to 
the set, ask the service technician to perform 

routine safety checks (as specified by the 
manufacturer) to determine that the set is in 

safe operating condition, and to so certify. 
When the set reaches the end of its useful life, 

improper disposal could result in a picture 
tube implosion. Ask a qualified service 

technician to dispose of the set.

GROUND
CLAMP

ELECTRIC
SERVICE
EQUIPMENT

NEC - NATIONAL ELECTRIC CODE

ANTENNA
LEAD IN
WIRE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ARTICLE 250, PART H)

Содержание KV-32FS120 - FD Trinitron WEGA Flat-Screen CRT TV

























































Отзывы: