31
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Notes on Using This Connection
To Do This ...
Do This ...
Watch the satellite receiver
Press
TV/VIDEO
repeatedly to select the VCR input (VIDEO 1 in the
illustration).
The VCR must be turned on and set to the satellite receiver’s line input.
Watch the VCR
Press
TV/VIDEO
repeatedly to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
Set up the TV remote control
to operate the satellite
receiver or VCR
If you have a non-Sony VCR or satellite receiver, you must program the
remote control. See “Programming the Remote Control” on pages 43-44.
Activate the TV remote
control to operate the satellite
receiver or VCR
For the satellite receiver, press
SAT/CABLE FUNCTION
. For the VCR, open the
outside cover, as shown on page 42. Then set the A/V slide switch to the
position you programmed for the VCR.
Control satellite receiver and
VCR functions with the TV
remote control
See “Operating a Satellite Receiver” on page 62 and “Operating a VCR” on
page 62.
Label video inputs to easily
identify equipment connected
to the TV
See the instructions for setting up Video Labels on page 78.