14
Additional TV Features
Before listening to Dolby Pro Logic encoded programmes, you can adapt the Dolby features to suit your own taste. Normally this
is only required when you install the TV and the speakers, or when changing the speaker positions.
Setting up Dolby Pro Logic
1. Press the MENU button on the remote control to display
the menu on the TV screen.
2. Press the
V
or
v
buttons to select the
symbol on the
menu screen then press the
b
button to enter the
‘PRESET’ menu.
3. Press the
V
or
v
buttons to select ‘Dolby Pro Logic
Setup’ on the menu screen then press the
b
button to
enter the ‘DOLBY PRO LOGIC SETUP’ menu.
4. Press the
V
or
v
buttons to select ‘Mode’, then press the
b
button to enter. Press the
b
or
B
buttons to select one
of the following modes then press the OK button to store
the chosen mode:
Dolby Pro Logic: all 5 speakers are activated
Dolby 3 stereo: surround speakers are not used
5. Press the
v
button to select ‘Centre Mode’, then push the
b
button to enter. Press the
b
or
B
buttons to select one
of the following modes then press the OK button to store
the chosen mode:
Normal: all 5 speakers are activated
Wide: wider bandwidth for centre speaker
Phantom: centre speaker is not used
6. Press the
v
button to select ‘Test Tone’ then push the
b
button to enter. Press the
b
or
B
buttons to select ‘On’,
then press the OK button.
The test tone will cycle through all the speakers.
7. Press the
v
button to select the ‘Left Speaker’, then press
the
b
button to confirm. The tone remains at the left
speaker.
8. Press the
b
or
B
buttons to alter the sound level, then
press the OK button.
9. Repeat steps 7 and 8 to select and adjust the ‘Centre’,
‘Right’, and ‘Surround’ speakers, so that the sound output
from all speakers are balanced in relation to your sitting
position.
10. Press the MENU button to remove the display from the
TV screen.
OK
.
.
Содержание KV-28FS20U
Страница 30: ...28 ...