11
GB
Menu System
continued...
2
After selecting the Channel option, press
.
Then press
or
to select the channel
tuning (“C” for terrestrial channels or “S” for
cable channels). Next press
. After that,
press the number buttons to enter directly the
channel number of the TV Broadcast or the
channel of the VCR signal. If you do not
know the channel number, press
or
to
search for it. When you tune the desired
channel, press OK twice to store.
Repeat all the above steps to tune and store more
channels.
b)
Normally the automatic fine tuning (AFT) is
operating, however you can manually fine
tune the TV to obtain a better picture
reception in the case that the picture is
distorted.
To do that: while watching the channel (TV
Broadcast) you wish to fine tune, select the
AFT
option and press
. Next press
or
to adjust the fine tuning between -15
and +15. Finally press OK twice to store.
c)
Skip any unwanted programme numbers
when they are selected with the PROGR +/-
buttons.
To do that: Highlighting the Programme
option, press the PROGR +/- button to select
the programme number you want to skip.
When the programme you want to skip
appears on the screen, select the Skip option
and press
. Next press
or
to select
Yes
. Finally press OK twice to confirm and
store.
To cancel this function afterwards, select “No”
instead of “Yes” in the step above.
d)
Label a channel using up to five characters.
To do that: Highlighting the Programme
option, press the PROGR +/- button to select
the programme number with the channel
you wish to name. When the programme you
want to name appears on the screen, select
the Label option and press
. Next
press
o
r
to select a letter, number or
“-“ for a blank. Press
to confirm this
character. Select the other four characters in
the same way. After selecting all the
characters, press OK twice to store.
Level 1
Level 2
Level 3 / Function
