background image

20

-EN

Operations

S VIDEO

VIDEO L(MONO)––AUDIO––R

ENTER

MENU COLOR SYSTEM

–––––––– VIDEO 3 IN ––––––––

Using the AV OUT (advance rec-out)
terminal

You can select the output signal from the VIDEO jacks
at the rear of the projection TV.
The S Video output can be used only when MONITOR
is selected.

1

Press MENU.

2

Press 

¢

 + or 

 –  to select FEATURES, and

press ENTER.

3

Press 

¢

 + or 

 – to select AV OUT, and press

ENTER.

4

Press 

¢

 + or 

 – to select the output signal,

and press ENTER.

You can use headphones to enjoy the sound of the TV.
This feature does not allow you to enjoy the sound of
PIP screens.

Listening to the sound of the
projection TV with headphones

Insert the headphones into the 

2

 (headphones)

jack located on the front panel of the
projection TV.

The sound from the speaker is shut off.
To adjust the headphones volume, press VOL +/–.

KP-E41

KP-E53/E61

Customizing the
projection TV

Using headphones

Select

TV

MONITOR

To

Output the TV signal.

Output the signal of the picture you are
watching as a main picture.

Note

Do not change the channel while recording with a VCR
through the MONITOR/TV OUT jacks.  If you change the
channel, it also changes the channel you are recording.

S VIDEO

VIDEO

AUDIO

ENTER

MENU

COLOR

SYSTEM

–––––––– VIDEO 3 IN ––––––––

L(MONO)

R

Содержание KP-E41





























Отзывы: