18
KLV-40V510A/46V510A
KLV-40V510A/46V510A
1-7. LCD
PANEL
REMOVAL
1 Remove LVDS cable and holder from TCON and LCD panel
2 Remove 2 screws and release LCD panel from Bezel
3 Disconnect 2 connectors from Inverter Board
4 Remove 3 screws and detach Heat Sink from LCD Panel
5 Gently remove Radiation Sheet
6 Carefully peel off Insulating Sheet from LCD Panel
NOTE: Heat Sink, Radiation Sheet and Insulating Sheet are not included in LCD Panel unit.
For part number information, refer to the Exploded View Section of this manual.
1-7-1. CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
→
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
→
If using a chemically pretreated cloth, please follow the instruction provided on the package.
→
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
→
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
Bezel
LCD Panel
KLV-46V510A Only
Heat Sink
Radiation
Sheet
3
1
2 Screw,
+BVTP2 4X16
6
4 Screw,
+PSW M3X8
5
Double Sided Tape
Insulating Sheet (IP2)
Detail
KLV-40V510A Only
Double Sided Tape
Insulating Sheet (IP1)
Detail
Soft Cloth