12
KLV-40V510A/46V510A
KLV-40V510A/46V510A
SECTION 1: DISASSEMBLY
1-1. REAR COVER REMOVAL
1 Remove 18 screws from Rear Cover
(KLV-40V510A Only)
Remove 20 screws from Rear Cover
(KLV-46V510A Only)
2 Remove 1 screw from Side Jack position
3 Remove 1 screw from Terminal position
4 Remove 4 screws from Rear Cover
NOTE: The Rear Cover is attached to the Bezel Assembly with three small tabs.
Use caution when removing the Rear Cover not to damage these tabs.
1
Screw,
+BVTP2 4X16
2 Screw,
+BVTP 3X12 TYPE2 IT-3
4
Screw, +PSW M4X12
Rear Cover
Bezel
Tab Inserts
3 Screw,
+BVTP 3X12 TYPE2 IT-3
1-2. SWITCH
UNIT
REMOVAL
1 Slide out Switch unit from Bezel
2 Disconnect 1 connector from HRT1 Board and remove 4 screws
Bezel
Switch Unit
1
2