Sony KDP-57XBR2 - Digital High Definition Projection Tv, Руководство по обслуживанию

Страница: 43 / 228

– 42 –
KDP-57XBR2/65XBR2
K
RM-Y185
3. Operation Method for Fine Adjustment
1) Set in the service mode and select the category “PJE”.
2) Select “00 FDIS” so that the data at each position can be
displayed in the fine adjustment mode, and set the data to “01”.
3) Press “ 9 ” button on the commander, and the fine
adjustment mode will be active where a green marker
appears in the center of screen (in the case of GRN mode).
4) Press “ ” button on the commander, and the marker color will
be switched between green (GRN mode) and white alternately.
5) Use “
1
” or “
4
” button on the commander, or the joystick
to move the marker to the position to be adjusted, where fine
adjustment can be made.
• When marker color is white.
(in this case, fine adjustment is disabled)
Operating the joystick can move the marker
up, down, or to the left or right freely.
• When marker color is green. (GRN mode)
1
: moves the marker clockwise from center to outside.
4
: moves the marker counterclockwise from outside to center.
• Fine adjustment can be made on the basis of marker
position by moving the joystick
V
,
v
,
B
,
b
.
6) Press “ 9 ” button on the commander to return to the rough
adjustment mode.
3-11-4. Projector Engine Adjustment
(Sub Deflection Adjustment)
Note: If the value of over the limit value, adjust these in the fine
adjustment .
< Rough Adjustment Data Limit Valune >
CENT H : 35±170 V : 20±170
SIZE H : –75max
LIN H BLU : –425min
H RED : 425max
<Adjustment for NTSC Full Screen Mode>
The adjustment should be done in the numerical order given.
1. Green Adjustment
1) Place the caps on the red and blue lenses so that only the
green color is displayed.
2) Enter the monoscope signal to set.
3) Select the “PJE” mode.
4) Press “
6
” button on the commander to display internal test
signal (crosshatch).
5) Select “GRN CENT”, and adjust so that the picture coincide
in the center of screen.
Adjustment Type
Adjustment Item GRN RED BLU
H / V H / V H / V
CENT a / a a / a a / a
SKEW
a
/
a a
/
a a
/
a
SIZE a / a a / a a / a
LIN a / a a / a a / a
KEY – / a – / a – / a
PIN a / a a / a a / a
MLIN a / – a / – a / –
MSIZ
a
/ –
a
/ –
a
/ –
Adjustment
a
: Yes – : No
CROSSHATCH
Movement when moving
the joystick
V
.
Movement when moving
the joystic
b .
CROSSHATCH
• GRN CENT (horizontally/vertically)
Move the joystick b . Move the joystick B .
Move the joystick
V
. Move the joystick
v
.