13
KDL-40SL150
KDL-40SL150
SECTION 1: DISASSEMBLY
1-2. SWITCH UNIT REMOVAL (CONTAINS HSW3 BOARD)
1-1. REAR COVER REMOVAL
1 Remove 18 screws from Rear Cover
2 Remove 1 screw from Side Jack position
3 Remove 1 screw from Terminal position
4 Remove 4 screws from Rear Cover
NOTE: The Rear Cover is attached to the Bezel Assembly with three small tabs.
Use caution when removing the Rear Cover not to damage these tabs.
1 Slide out Switch unit from Bezel
2 Disconnect 1 connector from HSW3 Board
1 Screw,
+BVTP2 4X16
2 Screw,
+BVTP 3X12
TYPE IT-3
3 Screw,
+BVTP 3X12
TYPE IT-3
4 Screw,
+PSW M4X12
Rear Cover
Bezel
Tab Inserts
Bezel
Switch Unit (Contains HSW3 Board)
1
2