Sony KD-28DX40U, Руководство по обслуживанию

Страница: 6 / 62

- 6 -
Getting Started
6
Getting Started
5. Automatically tuning the TV
1. When you switch on the TV for the first time a menu appears on the
screen asking you to check if the picture is slanted. (Sometimes the
Earth’s natural magnetism can cause the screen to look tilted.)
2. The autotune prompt screen appears. Press the OK button to select
‘Yes’. The autotune procedure begins.
The Digital autotune display appears on screen and the search and
store procedure begins. All the available Digital channels will now be
captured and stored. As this may take some time, a message is
included in the display to inform you of the tuning progress.
When Digital tuning is complete, the analogue display appears
automatically and the search and store procedure for the analogue
channels begins.
If no Digital and no analogue channels are found, a menu appears
asking you to confirm your aerial is connected. After checking the
aerial has been connected press OK to begin the autotune
procedure again.
Once all Digital and analogue channels have been captured and
stored, the TV returns to normal operation and displays the Digital
channel captured on channel number 1.
Note: If no Digital channels are captured, the analogue channel that is stored
on channel number 1 is displayed.
3. To view programmes, press the PROG+/- buttons or the numbered
buttons.
a) If no correction is required, press the
V
or
v
buttons on the
remote control to highlight ‘Not necessary’ and press the OK
button.
b) If some correction is required, press the
V
or
v
buttons on the
remote control to highlight ‘Adjust now’, then press the OK
button. Correct the slant by pressing the
V
or
v
buttons then
press the OK button to store.
Not necessary
If picture slants, please
adjust picture rotation.
Adjust now
OK OK
Auto Tuning
Programme: 02
Channel : C29
Completed 16%
Checking the picture tilt.
The autotune prompt screen.
Tuning the Digital channels.
Tuning the analogue channels.
6. Finding the video channel
If you connected a VCR to your TV when following the ‘Connecting an
aerial and a VCR’ instructions, you will now need to find your video
channel. Ensure the TV is in analogue mode. If it is not, press the
DIGITAL/
button on the remote control.
1. Press the PROG +/- buttons on the remote control until the picture
from the pre-recorded tape appears on the TV screen.
Notes: If you wish to move your video channel to a different programme number,
refer to ‘The Set Up menu’ section of this manual.
If you have connected your VCR using a scart lead, press the /
button on the remote control until the picture from the pre-recorded tape
appears on the TV screen. (Refer to ‘Connecting additional equipment’).
VIDEO
/
TV
/
DIGITAL
OK
1
2 3
6 5 4
7 8
9
0
Basic Operation
Basic Operation
9
Selecting Digital or analogue mode
Press the DIGITAL/ button on the remote control to switch between Digital and analogue mode. To
check if you are watching a Digital or analogue mode press the PROG +/- button. If you are watching a
digital programme a banner will appear momentarily at the top of the screen.
The Programme Index table
The ‘Programme Index table’ is a quick and easy way to search for a channel you wish to view. The
‘Programme Index table’ is only available in analogue mode.
1. Press the OK button to display the ‘Programme Index table’ on screen.
2. Press the
v
or
V
button to scroll through the list until the channel you wish to view is highlighted.
3. Press the OK button to display your chosen channel on the TV screen.
The Channel Index menu
The ‘Channel Index menu’ provides you with a quick and easy way to:-
a) View a complete list of the programmes available for selection,
b) Obtain a preview of the programmes contained in the list,
c) Search for a programme quickly by selecting from different categories of programmes,
d) Store programmes into a list of favourites.
The ‘Channel Index menu’ is only available in Digital mode.
1. Press the OK button on the remote control to display the ‘Channel Index menu’ on the TV screen.
The menu contains a list of all the available channels. The name of the programme currently being
shown along with its start and finish times is shown for each of the available channels. The current
channel is previewed in the top right corner of the screen with its channel name and number
displayed below it.
2. Press the
V
or
v
buttons to move the coloured cursor up or down the list to select the desired
programme. If you do not want to select a programme from the 6 channels listed, press the GREEN
button to display the next 6 programmes or the RED button to display the preceding 6 channels.
3. Press the OK button to display the highlighted programme in the preview window*.
4. Press the OK button to exit the ‘Channel Index menu’. The programme that was being previewed will
be displayed.
OK
*Note: If an age limit for viewing has been set and the programme selected exceeds that age limit, you will need to
enter your PIN code before the preview is displayed. Refer to ‘The Main Menu’ for more information on the ‘PIN
Code’ feature. Programmes that exceed the age limit you have set will be identified by a
symbol.
OK
The operating instructions mentioned here are partial abstracts from the ‘Operating
Instruction Manual’. The page numbers of the ‘Operating Instruction Manual’ remain
as in the manual.
SECTION 1
GENERAL