Ad
minis
tra
ting t
he Camer
a
Setting the Alarm Out 1 or 2 — Alarm out 1 or 2 setting Page
34
Setting the Alarm Out 1
or 2
— Alarm out 1 or 2 setting Page
When you click
Alarm out 1
on the Administrator
menu, the Alarm out 1 setting page appears. When you
click
Alarm out 2
on the Administrator menu, the
Alarm out 2 setting page appears.
Use these pages to set up for the Alarm out function that
controls the alarm out 1 or alarm out 2 of the I/O port
located on the rear the camera. You can control the
alarm out when a trigger occurs by an external sensor
input, the built-in activity detection function, a manual
trigger button, the Day/Night function or the timer.
The setting items for alarm out 1 and alarm out 2 are the
same. This section explains how to set alarm out 1 as an
example.
Activating/Deactivating the Alarm
Out 1 Function
— Alarm out 1 usage setting Page
To activate the Alarm out 1 function, select
Use alarm
out 1 function
and click
OK
. The Alarm out 1 setting
page appears.
When you do not use the Alarm out 1 function, select
Do
not use alarm out 1 function
and click
OK
.
Setting the Alarm Out 1 Function
— Alarm out 1 setting Page
Mode
Select the mode of the Alarm out 1 function.
Manual:
Controls the alarm out 1 manually.
In this mode, you can short-circuit and open the
alarm out 1 by clicking the
(Trigger) button on
the main viewer page. (See “Controlling the
Application Manually” on page 11.)
Day/Night:
Controls alarm out 1 by synchronizing with
the Day/Night function of the camera. When you
select
Day/Night
, the
Day/Night setting
button
appears. Click the button, and the Camera setting
page appears and you can set the Day/Night function
(see page 20).
In the Night mode, the relay corresponding to the
alarm out 1 is short-circuited. In the Day mode, it is
open.
Alarm:
Controls alarm out 1 by synchronizing with an
external sensor input or the built-in activity detection
function. When you select
Alarm
, the Alarm mode
setting section appears (see page 34).
Timer:
Controls alarm out 1 by the timer. When you
select
Timer
, the Timer mode setting section appears
(see page 35).
Alarm mode setting Section
Alarm
Select the alarm to link the alarm out 1 function. If the
selected alarm is detected, the alarm out 1 status
changes.
Sensor:
External sensor connected to sensor input of the
camera I/O port
Activity detection:
The activity detection function built
in the camera.
To set the activity detection function, click
Activity
detection
. The Activity detection setting page
appears (see page 41).
Available period
Select the period for which the alarm mode is available.
Always:
The alarm mode is available any time.
Use scheduler:
The alarm mode is available according
to the schedule selected on the Schedule No. menu
below.