9
GB
Location and Functions of Parts and Controls
O
v
er
vi
ew
6
(Ethernet) port
Connect to a hub or computer on the
10BASE-T or 100BASE-TX network
using an Ethernet cable (UTP, category
5).
When using a LAN cable: For safety, do
not connect to the connector for
peripheral device wiring that might have
excessive voltage.
7
T
(video output) connector
(BNC type)
Outputs a composite video signal.
Connect to a composite video input
connector of a video monitor, VCR, etc.
8
I/O (Input/Output) port
This port is provided with RS-485 or
RS-232C port, three sensor inputs and
two alarm outputs.
The RS-485 or RS-232C port is used
when you connect peripheral devices to
the camera using the RS-485 or RS-
232C interface, and control the devices
from the computer or receive data from
the devices via the network.
The sensor inputs are used to
synchronize the camera operation with
E-mail or other applications.
The alarm outputs are used to control the
connected peripheral devices by
synchronizing with an external sensor
input, the built-in activity detection
function, a manual trigger button, the
Day/Night function or the timer
function.
For details on each function and
required settings, see the User’s Guide
stored in the supplied CD-ROM.
For the pin assignment and wiring, see
“Pin Assignment and Use of I/O Port”
on page 27.
9
DC IN 12 V (power input)
connector
Connect the supplied AC power adaptor.
q;
Reset switch
To reset the camera to the factory default
settings, hold down this switch and
supply the power to the camera.
Caution
2
4
6
8
10
12
14
16
18
1
3
5
7
9
11
13
15
17
!
DC IN 12V
6
7
8
9 q;
Rear
