A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory setting Menu
57
POP before SMTP:
Select if POP before SMTP
authentication is necessary when an e-mail is
sent.
Note
When you set to
On
, be sure to select either or both
SMTP
or/and
POP before SMTP
.
POP server name
This is necessary when
POP before SMTP
is selected
in
Authentication
.
Type POP (receiving mail) server name up to 64
characters. Otherwise type the IP address of POP server.
This setting is necessary when SMTP server that sends a
mail authenticates using the account of POP user.
User name, password
Type the user name and the password of the user who
has the mail account. This setting is necessary when
SMTP server that sends a mail authenticates.
Administrator e-mail address
Type the e-mail address of the recipient of the warning
mail (e-mail address of the camera Administrator), up to
64 characters.
OK/Cancel
See “Buttons common to every setting menu” on page
34.
Alarm recording Tab — Setting the
Image Memory Function when
Detecting the Alarm
You can set to record the image and audio file to the
memory linked with the external sensor input or with the
built-in motion detection function.
Alarm recording
Select
On
to set to record the image and audio file to the
memory linked with the external sensor input or with the
built-in motion detection function.
Image file name
Type the file name you want to assign to the images
when saving in the built-in memory. You can use up to
10 alphanumeric characters, - (hyphen) and _
(underscore) for naming.
Suffix
Select a suffix to add to the file name.
Date & time:
The Date & time suffix is added to the
Image file name.
The Date & time suffix consists of lower two-digits
of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits), second (2 digits)
and consecutive number (2 digits), thus 14-digit
number is added to the file name.
Sequence number:
A consecutive number of 10 digits
between 0000000001 and 4294967295 and an
consecutive 2 digits number is added to the Image
file name.
Tip
A consecutive number added to
Date & time
and
Sequence number
is used to identify each of multiple
files created with one alarm event.
Sequence number clear
Click
Clear
to reset the Sequence number suffix to 1.
Alarm
Select the connected alarm.
Sensor input1:
The external sensor which is connected
to sensor input1 of the camera I/O port.
Sensor input2:
The external sensor which is connected
to sensor input2 of the camera I/O port.
Motion detection:
Click
Motion detection
button, and
the Motion detection setting page is displayed. You
can set the motion detection function (page 65).
Notes
•
Motion detection
works only when the Video mode is
set to
MPEG4
and the
Cropping
is set to
Off
.
• In the case that the synchronized preset position is
specified, the alarm event that happens during moving
to the preset position will be invalid.
Effective period
Set the period when the alarm detection is effective.
Always:
The alarm detection is always effective.
