A
d
mini
s
tra
ting
t
he
Came
ra
Configuring the Network — Network setting Menu
46
WEP
Select
On
when you use the WEP (Wired Equivalent
Privacy) keys, or
Off
when you do not use it.
The
WEP key
data settings are valid only when the
WEP menu is set to
On
.
WEP key/Retype WEP key
Specify up to 4 WEP keys. The length of a WEP key is
40 or 104 bit. A 104-bit WEP key has a higher security
level than a 40-bit key. You can type the WEP key either
in hexadecimal numbers (0 to 9 and A to F) or ASCII
characters (alphanumeric).
When the Type menu is set to
Infrastructure mode
, the
WEP key should be the same as that of the access point.
When the Type menu is set to
Ad hoc mode
, the WEP
key should be the same as that of the communication
client.
OK/Cancel
See “Buttons common to every setting menu” on page
34.
PPPoE Tab - Setting of PPPoE
Connection
Use it when you connect the camera with PPPoE (Point-
to-Point Protocol over Ethernet). PPPoE connection is
the protocol that is widely used in xDSL (Digital
Subscriber Line such as ADSL, VDSL or SDSL) as the
authentication and connection system.
PPPoE
Set whether you connect the camera using PPPoE
function or not. When
On
is selected, PPPoE connection
is used.
IP address
When you connect to the network by PPPoE function, IP
address obtained at PPPoE connection is displayed.
User ID
Type the user ID for the authentication necessary for
PPPoE connection. Type it up to 64 characters.
Password
Type the password for the authentication necessary for
PPPoE connection. Type it from 1 to 32 characters.
Re-type password
To certain the password, re-type the characters as them
typed in the password box.
Obtain DNS server address automatically
Select it to obtain the address of DNS server
automatically.
Use the following DNS server address
Select this when you set the fixed address as the IP
address of DNS server.
Primary DNS server
Type the IP address of the primary DNS server.
Secondary DNS server
Type the IP address of the secondary DNS server.
OK/Cancel
