A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Camera Image — Camera Menu
40
Preview screen
Preview the image and adjust the focus/zoom.
The current image focus/zoom position is superimposed
when adjusting the focus/zoom.
For the details of each button, please refer to the Control
bar of the Plug-in free viewer (page 24).
Note
If you click the buttons in this tab, in order to adjust the
focus/zoom easily, the settings below are temporarily
changed:
– Privacy Masking and
Cropping
are deactivated.
(SNC-CH120/CH160/DH120/DH120T/DH160 do
not support the Privacy Masking function.)
– The current image focus/zoom position is
superimposed.
– The alarm of
Motion detection
is deactivated.
Adjusting the zoom
Click the –500, –100, –10, +10, +100 or +500 buttons to
adjust the zoom position accordingly.
Note
The focus is moved slightly after adjusting; adjust the
focus again, as necessary.
Adjusting the focus
Click
Start
button in
Easy Focus
to set the focus to the
optimum position.
Notes
• The most suitable focus may not be available
depending on imaging conditions. If so, click the –20,
–5, –1, +1, +5, +20 buttons to adjust the focus.
• When
SolidPTZ
is set to
On
,
Easy Focus
may not
work properly. In this case, set
SolidPTZ
to
Off
.
Picture Tab
You can set the color conditions, exposure, etc., of the
camera.
Preview screen
Preview the image and adjust the picture setting.
For details on each button, refer to the Control bar of the
Plug-in free viewer (page 24).
Exposure
Adjust the settings of exposure.
Backlight compensation
Select
On
to enable the backlight compensation
function.
Note
When the backlight compensation function is set to
On
,
hunting may occur. In this case, select
Off
.
Exposure compensation
Select the exposure correction value from the list box to
adjust the target brightness for the automatic exposure
setting.
A larger value brightens the image, and a smaller value
darkens the image. Selectable values are as follows:
+2.0, +1.6, +1.3, +1.0, +0.6, +0.3, 0, –0.3, –0.6, –1.0,
–1.3, –1.6, –2.0 (EV)
