Sony IPELA NSR Series, Руководство пользователя, Страница: 85 / 137

85
Configuring Recording Schedules
C
h
ap
te
r 4
A
pplic
at
io
n
S
e
tti
n
gs
F
Associate recording data with alarm
This item is displayed for schedule recording.
Select the check box to associate the recording data with
the alarm.
If you select the check box, configure the inputs of the
camera or IO device that will be the trigger for the alarm.
G
Event
Select the relationship of the camera for recording and the
sensor, and select the check box of the input to be the alarm
trigger.
For details on the relationship of the camera and sensor,
refer to
“About Relationship Between Sensor and Camera
when Alarm Occurs” (page 82) .
Record by each event
The camera and sensor form a one-to-one relationship.
Recording is started only for the camera of the sensor
that detected the alarm.
Record by selected event
Multiple inputs can be set for the one camera that is the
target for recording. Since recording can be started by
an input signal (alarm) from an external device to an
IO device, it is also possible for the sensor of a device
that is not set for the schedule to act as the trigger.
Camera
Select the check box of the input to be the alarm
trigger.
When “Record by selected event” is selected, you can
select multiple device inputs.
If the check box for “Show All Triggers” is selected, a
list of all the triggers configured for NSR is displayed,
so it is also possible for the sensors of devices not
configured for the schedule to act as triggers.
The input configured for each camera is displayed in
the list. For the configuring inputs, refer to
“Configuring Motion Detection Settings” (page 59)
and “Configuring Sensor Inputs” (page 86) .
H
Target Camera
Add the camera to become the target for recording to the
list, and configure settings related to images captured from
the camera.
Add Device
This displays the Add Device dialog box for adding a
device to the list.
Select the camera you want to add from the [Non-
target Camera] list, click [Add] to move the camera to
the [Target Camera] list, and click [OK].
Camera List
Select the image size, frame rate, and other items for
images captured from the camera, as necessary.
Adjust to Camera Settings
Match the values to those configured on the [Video]
tab in “Device Configuration.”
When the time set for regular recording and alarm
recording overlap, and the resolution for regular
recording is set to 320
×
240 dpi and the resolution for
alarm recording is set to 640
×
480 dpi, the resolution
for images captured from the camera becomes 640
×
480 dpi. Normally, images captured from cameras use
the maximum frame rate and resolution values for all
actions during operation.
I
OK
This creates a schedule in accordance with the set values,
and closes the dialog box.
J
Cancel
This cancels your settings, and closes the dialog box.
Note
Note