Sony IPELA NSR Series, Руководство пользователя, Страница: 35 / 137

35
Registering Devices
C
h
ap
te
r 4
A
pplic
at
io
n
S
e
tti
n
gs
If you click the [Reload] button, the automatic search is
performed again. Take care because apart from the user
name and password of the administrator, all of the values
you entered up until now will be replaced with the results
obtained with the automatic search.
The devices are registered to NSR.
Registering Devices Manually
Specify the IP address of a device to register the device
individually.
Before registering a device, start the browser and connect
directly to the device to confirm that images from the
camera can be seen. Also, for the IP address of the camera,
use the IP address that was entered in the browser.
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Click (Add).
The Add Device dialog box appears.
3
Configure each item, and click [OK].
For details on each of the items, refer to “Setting Items
of Add Device Dialog Box” (page 42) .
When registering a camera server (SNT series,
etc.):
The following dialog box appears.
Select the channel to use, and click [OK].
A check is performed to determine whether the maximum
number of registered cameras has been exceeded during
processing. If the maximum number has been exceeded, a
warning message appears to notify you and processing
stops.
The device is registered to NSR, and is added to the list.
If you specify an IP address and port number that
duplicates that of an already registered device, a warning
appears and the device cannot be registered.
Caution
Note
Note
Caution