Sony Ipela NSR-S10, Руководство пользователя

Страница: 45 / 67

45
Recording Setting
Cha
p
te
r 4
De
tai
led Des
c
ript
ion
s
of
Set
tings
and
Wi
ndo
ws
D
I/O Control
This section can be used to set sensor input and relays.
For details how to make these settings, refer to
“Advanced
Camera Settings” (page 41) .
Sensor
This displays the “Sensor Setting” screen, which is
used to set sensor input.
Relay
This displays the “Relay Setting” screen, which is used
to set relays.
E
Default
This restores the default settings.
Recording Setting
You can set recording to be performed at regular intervals
by configuring a recording schedule, or set recording to
start when an alarm occurs.
Recording schedules
The following recording modes are available for scheduled
recording on the NSR-S10/S20.
•
Continuous Recording
This records images from cameras at regular intervals
according to the set schedule.
•
Motion Recording
This begins recording only when a moving object is
detected within the time set for the schedule.
•
No Recording
This performs no schedule recording.
You can enable the recording modes individually, or use
any combination of the three modes. You can also
configure time periods during which actions such as
alarms and system reboots are disabled.
Example 1)
Configure [Continuous Recording] during
the day on weekdays, [Motion Recording] during
nights, and [No Recording] during weekends.
For details on this configuration, refer to
“Recording
Mode Combinations for Schedule Recording”
(page 46)
.
Example 2)
Configure recording to be disabled only
during specific days and time periods.
For details on this configuration, refer to
“Setting a
Schedule” (page 47) .
Example 3)
Configure periods during which actions such
as alarms and system reboots are disabled.
For details on this configuration, refer to
“Setting a
Schedule” (page 47) .
Alarm recording
In addition to motion detection recording using individual
cameras, the NSR-S10/S20 allows recording in response
to a combination of conditions such as motion detection
and sensor inputs from multiple cameras.
In such cases, configure the following settings.
• Set [Recording Mode] to [No Recording] in the
“Recording Setting” screen (page 48) .
• Select [Start Recording] for [Action] in the “Alarm
Setting” Screen (page 57) .
You can make settings concerning recording in the
“Recording Setting” screen.