Sony ILME-FR7 Скачать руководство пользователя страница 93

Страница: 93 / 458

Help Guide

Interchangeable Lens Digital Camera

ILME-FR7 / ILME-FR7K

Removing a Lens

Remove a lens using the reverse procedure of attaching the lens.

Note

Grasp the lens securely in your hand to prevent the lens from falling.

If another lens will not be attached immediately, always attach the body cap.

Check that the pin/tilt is locked.

Turn the clamp lever for the lens support pedestal attachment screw counterclockwise to loosen the lock.

Remove the lens support pedestal attachment screw on the lens support unit and move it to a position that
does not interfere with the lens.

Unlock the camera head and slide the camera head to the frontmost position.

For details, see steps 3 to 5 in “

Attaching a Lens

.”

Press and hold the lens release button and turn the lens counterclockwise while supporting the lens.

With the mount marks (white) of the camera and the lens aligned, pull out the lens toward the front.

Содержание ILME-FR7




















































































































































































































































































































































































































































Результаты поиска

Содержание ILME-FR7

Отзывы:

Похожие инструкции для ILME-FR7

Бренды по названию

Популярные бренды

Sony ILME-FR7, Руководство пользователя

Результаты поиска

Содержание ILME-FR7

Отзывы:

Похожие инструкции для ILME-FR7

Бренды по названию

Популярные бренды