– 15 –
– 17 –
– 16 –
ICF-1000L
4-4. SCHEMATIC DIAGRAMS
Note:
• All capacitors are in
µ
F unless otherwise noted. pF:
µµ
F
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise
specified.
•
f
: internal component.
Note: The components identified by mark
0
or dotted
line with mark
0
are critical for safety.
Replace only with part number specified.
•
: B+ Line.
•
H
: adjustment for repair.
• Power voltage is dc 6 V and fed with regulated dc power
supply from battery terminal.
• Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
no mark : FM
(
) : MW/LW/SW
• Voltages are taken with a VOM (Input impedance 10
M
Ω
).
Voltage variations may be noted due to normal produc-
tion tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal produc-
tion tolerances.
• Circled numbers refer to waveforms.
• Signal path.
F
: FM
f
: MW
z
Waveform
1
Q101
C
(Band : FM)
VOLT/DIV : 5 V AC
TIME/DIV : 1 msec
12 Vp-p
