background image

ICD-PX720  4-113-173-11(1)

GB

Ed

itin

g M

es

sa

ge

s

Press –

 or 

+ to select the 

folder that you want to move the 

message into, then press 

 PLAY/

STOP•ENTER.

The message is moved to the last 

position in the destination folder.
When you move a message to another 

folder, the original message in the 

previous folder will be deleted.

Press 

 (stop) to exit the menu 

mode.

Note

If 99 messages have been recorded in the 

folder to which you want to move a message, 

you cannot move it.

To cancel moving the message

Press 

 (stop) before step 4.

Dividing a Message 

into Two

+

DIVIDE

You can divide a message during 

playback, so that the message is divided 

into two parts and a new message 

number is added to the newer part 

of the divided message. By dividing a 

message, you can easily find the point 

from which you want to play back when 

you make a long recording such as at a 

meeting. You can divide a message until 

the total number of messages in the 

folder reaches 99.

Содержание ICD PX720 - 1 GB Digital Voice Recorder

































































































Отзывы: