manualshive.com logo in svg

Sony ICD PX720 - 1 GB Digital Voice Recorder, Руководство по эксплуатации, Страница: 35 / 96

Поделиться
Скачать
Sony ICD PX720 - 1 GB Digital Voice Recorder Скачать руководство пользователя страница 35

ICD-PX720  4-113-173-11(1)

GB

Re

co

rd

in

g

3 

Press –

 or 

+ to select “ON,” 

then press 

 PLAY/STOP•ENTER.

4 

Press –

 or 

+ to select 

“OVER,” then press 

 PLAY/

STOP•ENTER.

5 

Press 

 (stop) to exit the menu 

mode.

6 

When the message to be 

overwritten is played back, press 

 REC/PAUSE.

“

” and “OVER” will flash and the IC 

recorder stops in the recording pause 

mode.

7 

While “OVER” flashes, press 

 REC/

PAUSE again.

The operation indicator will light in red 

and recording starts.

8 

Press 

 (stop) to stop recording.

Notes

You cannot overwrite a recoding if the 

remaining memory is insufficient.
The overwritten portion of a message will be 

recorded in the same recording mode.
If 10 minutes have passed after step 6, you 

must start the procedure again from the 

beginning.

Содержание ICD PX720 - 1 GB Digital Voice Recorder

































































































Отзывы:

Нет отзывов