Basic Operations
19
GB
Searching forward/backward during playback (Cue/Review)
To search forward, keep
>
pressed during playback and release the
button at the point you wish to resume playback.
To search backward, keep
.
pressed during playback and release the
button at the point you wish to resume playback.
The unit searches at slow speed (unit of 4 seconds) with playback sound. It
is useful when checking one word forward or behind.
If you keep
>
or
.
pressed, the unit starts searching at higher speed.
Between messages the unit pauses for 2 seconds.
During cue/review, the counter will be displayed, regardless of the
display mode setting (page 39).
You can cue or review during playback pause. The unit goes back into
playback pause at the point you release
>
or
.
.
1
Tip
When fast playback is done to the end of the last message, “END” flashes
for 5 seconds and the OPR indicator lights up in green. (You cannot hear
the playback sound.) If you keep
.
pressed while “END” is flashing,
the messages are played back rapidly, and normal playback will start at
the point you release the button.
When “END” stops flashing and the OPR indicator goes off, the unit will
stop at the beginning of the last message.
If the last message is long and you wish to start playback at a later part of
the message, keep
>
pressed to play back the message to the end and
then press
.
while “END” is flashing to go back to the desired point .
(For messages other than the last one, go to the beginning of the next
message and play backward to the desired point.)
Locating quickly the point you wish to start playback (Easy
Search)
When EASY-S is set to ON (page 41), you can quickly locate the point you
wish to start playback by pressing
>
or
.
repeatedly during playback
or playback pause.
You can go back approx. 3 seconds by pressing
.
once, or advance
approx 10 seconds by pressing
>
once. This function is useful when
locating a desired point in a long recording.
