52
GB
Using an Adding Recording
At a factory setting, you cannot add a recording (page 35) not to erase the
message by accidental operation. If you want to add a recording to a
previously recorded message (page 35) or add an overwrite recording
(page 36), change the REC-OP setting in the procedures below.
1
Turn the jog lever toward MENU.
The menu mode will be displayed in the display
window.
2
Press the jog lever up or down (
>/.
)
to select “REC-OP”, then press the jog lever
(
x
•
B
).
The adding recording window will be displayed.
3
Press the jog lever up or down (
>/.
)
to select “ON”, then press the jog lever
(
x
•
B
).
The setting is changed.
4
Press the jog lever up or down (
>/.
)
to select “ADD” or “OVER”, then press the
jog lever (
x
•
B
).
• ADD: adds a recording to a
previously recorded message
• OVER: adds an overwrite recording
5
Press the jog lever toward MENU to exit
the menu mode.
The normal display appears.
To prohibit to add a recording
In step 3 , select “OFF” and then press the jog lever (
x
•
B
).
Jog lever (
>/./x
•
B
/
MENU)
Содержание IC Recorder ICD-ST25
Страница 70: ...70GB ...
Страница 71: ...Additional Information 71GB ...
