US
Sa
ving images with an e
xter
nal devic
e
To disconnect your camcorder from the
computer
Click the icon at the bottom right of
the desktop of the computer
[Safely
remove USB Mass Storage Device-
Drive].
Touch
[Yes] on the camcorder
screen.
Disconnect the USB cable.
To play images recorded on the
camcorder, using a computer
Refer to the help on the supplied CD-ROM
“Content Management Utility.”
Notes
When importing a long movie or edited
image, use the supplied software “Content
Management Utility.” If you use any other
software, images may not be imported properly.
If file size exceeds 2 GB during a long recording,
a new file is created automatically, resulting
in the movie being divided into multiple files
when you view the recording media directly
from your computer after recording.
If you import images without using supplied
“Content Management Utility,” files
automatically created (due to the 2 GB limit)
may not be concatenated. Even if you usually
use other editing software, use the supplied
software “Content Management Utility” to
import images to the computer to ensure files
are concatenated and imported to the computer.
Touch [USB Connect] on the
camcorder screen.
If the [USB Select] screen does not appear,
touch
(MENU)
[Setup]
[
(Connection)]
[USB Connect].
Click [Next].
Follow the on-screen instructions
to install the software.
Restart the computer if required to
complete the installation.
When the installation is completed, the
following icon will appear, depending
on the selection in step 8.
Remove the CD-ROM from the
computer.