Sony HVO-3300MT Скачать руководство пользователя

Страница: 81 / 99

[Layout]

Select the number of still images to print on each sheet.
The layouts that appear and the default setting will vary
depending on your printer.
To use the system settings, select [User Settings].

[External Media] Tab

Configure save settings for videos and still images.

[Save Video]

Select the check box of the format in which videos will be
saved.
All of the check boxes are selected under default settings.

[Save Still]

Select the check box of the format in which still images
will be saved.
All of the check boxes are selected under default settings.

Editing the Doctor List

Select [Edit Doctor List] in the [System Admin
Settings] screen, and press the ENTER button.

The [Edit Doctor List] screen appears.

Edit the doctor information.

Sorting the Doctor List (page 81)

Editing Doctor Settings (page 81)

Deleting Doctors (page 82)

Select [Settings], and press the ENTER button.

The configurations are saved, and the [System Admin
Settings] screen appears again.

Sorting the Doctor List

Select the doctor you want to reposition in the [Edit
Doctor List] screen, select [Up] or [Down], and then
press the ENTER button.

The doctor entry moves up or down one position at a
time.

Editing Doctor Settings

Select the doctor for which you want to change
settings in the [Edit Doctor List] screen, select [Edit],
and then press the ENTER button.

The [Edit Doctor] screen appears.

After editing the settings, select [Apply] and press the
ENTER button.

The configuration is saved.

For details on each setting, see the following.

[General] Tab (page 80)

[File Server] Tab (page 80)

[Shared] Tab (page 80)

[Print] Tab (page 80)

[External Media] Tab (page 81)

Содержание HVO-3300MT




































































































Результаты поиска

Содержание HVO-3300MT

Отзывы:

Похожие инструкции для HVO-3300MT

Бренды по названию

Популярные бренды

Sony HVO-3300MT, Инструкция по эксплуатации

Результаты поиска

Содержание HVO-3300MT

Отзывы:

Похожие инструкции для HVO-3300MT

Бренды по названию

Популярные бренды