80
Doctor List Registration
Register doctor names and initial settings for each doctor.
The doctor information registered here will be used in the
doctor lists and default settings that appear in other
screens. You can register up to 100 doctors.
Registering Doctors
1
Select [Edit Doctor List] in the [System Admin
Settings] screen, and press the ENTER button.
The [Edit Doctor List] screen appears.
2
Select [Add], and press the ENTER button.
The [Add Doctor] screen appears.
3
Select a tab, and press the ENTER button.
4
Configure the settings in each tab as necessary.
For details on each tab, see the following.
[External Media] Tab (page 81)
5
When you finish configuration, select [Add] and
press the ENTER button.
The doctor information is added.
[General] Tab
Configure general settings such as the doctor name and
storage destination.
[No.]
Displays the doctor number.
A sequential number is assigned automatically and cannot
be changed.
[Name]
Enter up to 64 characters for the doctor name.
[Video Quality]
Select the video recording quality.
You can select from [Best], [High], and [Standard].
[External Media]
Select the external storage media that will be used during
simultaneous recording.
Select [External Media 1] or [External Media 2] in the
external storage settings screen, and select the external
media in the screen that appears.
The default setting is [Not Used].
The external storage media for Ch1 will also be displayed
for Ch2 and grayed out.
You cannot specify the same storage destination for both
[External Media 1] and [External Media 2].
[File Server] Tab
Configure these settings when specifying a server as the
storage destination.
[Server]
Select [System Settings] or [Share (CIFS)] for the server
type.
The default setting is [Not Used].
If you selected [Share (CIFS)], be sure to configure the
necessary settings in the [Shared] tab, in addition to the
[Server Name].
For details on this setting, see “[Shared] Tab” (page 80).
[Server Name]
Enter the server name.
[Share Name]
Enter the share name.
Use only alphanumeric characters and symbols
(excluding " = / \ [ ] :
|
< > + ; , ? *).
[Shared] Tab
Configure the necessary settings for when [Server] is set
to [Share (CIFS)] in the [File Server] tab.
[User Name]
Enter a user name.
[Password]
Enter the password.
[Print] Tab
[Printer]
Displays the name of the connected printer.
Tip
Содержание HVO-3300MT
Страница 99: ......
