Flash
HVL-F28RM
Adjusting the bounce flash angle
Simultaneous use of the flash light from this flash unit and the bounced light produces uneven lighting. To determine the bounce
flash angle, take the flash photography conditions into consideration, such as the distance to the bounce surface, the distance
from the camera to the subject, and the focal length of the lens.
Examples of flash photography conditions: the distance to the bounce surface, the distance from the camera to the subject, the
focal length of the lens
To bounce the flash light upward
Determine the bounce flash angle with consideration for the focal lengths of the lens listed in the following table.
Tips on using the bounce sheet
The bounce sheet creates a highlight in the subject's eyes and makes the subject look more vibrant.
The bounce sheet is pulled out along with the wide panel from this flash unit. Push the wide panel back into the flash unit.
Hint
When you use the bounce sheet for flash photography, tilt up the flashlamp by 80°.
5-023-112-11(1) Copyright 2020 Sony Corporation
Focal lengths of the lens Bounce angle
70 mm minimum
20°, 40°
28 mm - 70 mm
60°
28 mm maximum
80°, 120°
36
