Sony HT-SL900W Скачать руководство пользователя страница 38

Страница: 38 / 44

masterpage:Left

lename[E:\SEM_Janet\Revision_HT-

SL900W\J9040000_4254829121SL900WGB\4254829121\GB09ADD_HT-SL900W-CEL.fm]

model name1[HT-SL900W]

[4-254-829-

(1)]

If you experience any of the following
difficulties while using the receiver, use this
troubleshooting guide to help you remedy the
problem.

There is no sound or only a very low-level
sound no matter which component is
selected.

• Check that the speakers and components are

connected securely and correctly.

• Check that both the receiver and all components

are turned on.

• Check that you have selected the correct

component on the receiver.

• Check that MASTER VOLUME on the receiver is

not set at

“

VOL MIN

”

• Press MUTING to cancel the muting function.

There is no sound from a specific component.

• Check that the component is connected correctly

to the audio input jacks for that component.

• Check that the cord(s) used for the connection is

(are) fully inserted into the jacks on both the
receiver and the component.

• Check that you have selected the correct

component on the receiver.

There is no sound from one of the front
speakers.

• Check that the component is connected correctly

to the audio input jacks for that component.

• Check that the cord(s) used for the connection is

(are) fully inserted into the jacks on both the
receiver and the component.

The left and right sounds are unbalanced or
reversed.

• Check that the speakers and components are

connected correctly and securely.

• Adjust balance parameters in the LEVEL menu.

There is severe hum or noise.

• Check that the speakers and components are

connected securely.

• Check that the connecting cords are away from a

transformer or motor, and at least 3 meters away
from a TV set or fluorescent light.

• Move your TV away from the audio components.

• The plugs and jacks are dirty. Wipe them with a

cloth slightly moistened with alcohol.

There is no sound or only a very low-level
sound is heard from the center or/and
surround speakers.

• Make sure the sound field function is on (press

SOUND FIELD + or SOUND FIELD –).

• Select a CINEMA STUDIO EX mode (page 27).

• Adjust the speaker level (page 19).

• Wireless setting of the surround speaker is not

correct (page 14).

• The plasma display may interfere with

transmission, in which case, adjust the position of
the IR transmitter and IR receiver (page 15).

• Install the IR transmitter and IR receiver closer to

one another.

• Do not install the IR transmitter in a place exposed

to direct sunlight or strong light such as an
incandescent lamp.

• Clean the surface of the IR transmitter and IR

receiver.

There is no sound from the sub woofer.

• Check that the sub woofer is connected correctly

and securely.

The surround effect cannot be obtained.

• Make sure the sound field function is on (press

SOUND FIELD + or SOUND FIELD –).

• Sound fields do not function for the signals with a

sampling frequency of more than 48 kHz.

Dolby Digital or DTS multi channel sound is
not reproduced.

• Check that the playing DVD, etc. is recorded in

Dolby Digital or DTS format.

• When connecting the DVD player, etc. to the

digital input jacks of this receiver, check the audio
setting (settings for the audio output) of the
connected component.

Troubleshooting

GB01COV_HT-SL900W-CEL.book Page 38 Monday, May 24, 2004 8:22 AM

Содержание HT-SL900W













































Результаты поиска

Содержание HT-SL900W

Отзывы:

Похожие инструкции для HT-SL900W

Бренды по названию

Популярные бренды

Sony HT-SL900W, Руководство по эксплуатации

Результаты поиска

Содержание HT-SL900W

Отзывы:

Похожие инструкции для HT-SL900W

Бренды по названию

Популярные бренды