13
GB
WALL MOUNT TEMPLATE on a
wall by using a commercially
available adhesive tape, etc.
3
Fasten the screws into the marks
on SCREW LINE (
) of WALL
MOUNT TEMPLATE as the
illustration below.
4
Remove WALL MOUNT TEMPLATE.
5
Hang the Bar Speaker on the
screws.
Align the holes of the rear of the Bar
Speaker with the screws, then hang
the Bar Speaker on the two screws.
When sticking WALL MOUNT TEMPLATE,
smooth it out fully.
For HT-S500RF
1
Prepare a screw (not supplied) for
each speaker that is suitable for
the wall mount hole on the rear of
the surround speaker.
2
Fasten the screw in the wall.
The screw should protrude as
illustration.
Screws
Marks
6 mm to
7 mm
297.5 mm
297.5 mm
Note
Mounting the Surround
Speakers on a Wall
Hole on the rear of the surround speaker
4 mm
More than 30 mm
5 mm
10 mm
8 mm to
9 mm
