Sony HT-FS30, Руководство по эксплуатации

Страница: 41 / 48

41
GB
A
d
ditio
n
al Inf
o
rm
at
ion
OTHER
Control for HDMI does not work properly.
• Check the HDMI connection (page 15).
• Set up Control for HDMI on the TV (page
21).
• Make sure the connected equipment is
compatible with “BRAVIA” Sync.
• Check the Control for HDMI settings on the
connected equipment. Refer to the operating
instructions supplied with the connected
equipment.
• If you change the HDMI connection,
connect/disconnect the AC power cord
(mains lead), or if there is a power failure,
repeat the procedures of “Preparing for
“BRAVIA” Sync” (page 19).
• If you connect the audio output of the video
equipment and the system using other than
an HDMI cable, no sound may be output
because of “BRAVIA” Sync. In this case, set
the “CTRL HDMI” to “OFF” (page 20) or
connect the audio output jack directly to the
TV instead of the system.
If “PROTECTOR” and “PUSH POWER” appear
alternately on the front panel display.
Press
?/1
to turn off the system, and check
the following item after “STANDBY”
disappears.
• Is anything blocking the ventilation holes of
the system?
If the system still does not
operate properly after performing
the above measures, reset the
system as follows:
Use buttons on the system for the operation.
1
Press ?/1 to turn on the power.
2
Press ?/1 while pressing INPUT and
VOLUME –.
“COLD RESET” appears and the system is
reset. AMP menu, sound field, etc., return to
the default settings.
After checking the above item and fixing any
problems, turn on the system. If the cause of the
problem cannot be found even after checking the
above item, consult your nearest Sony dealer.