Sony HT-FS30, Руководство по эксплуатации

Страница: 37 / 48

37
GB
Ad
v
a
nce
d
Setti
ngs
Setting the signal level of the
center or subwoofer (CNT
LEVEL, SW LEVEL)
The sound from the center is output from the left
and right speaker on the system.
You can adjust the level and the balance of the
center and subwoofer. The parameters of “CNT
LEVEL” and “SW LEVEL” range from “–6” to
“+6” in 1-step increments.
• CNT LEVEL:Adjusts the center level.
• SW LEVEL: Adjusts the subwoofer level.
Enjoying Dolby Digital sound
at low volume (AUDIO DRC)
Compresses the dynamic range of the sound
track. Useful for enjoying movies at low volume.
AUDIO DRC applies to Dolby Digital, Dolby
Digital Plus, and Dolby TrueHD sources.
• ON:
Compresses the sound in accordance
with the information contained in the
content.
• AUTO: Compresses the sound automatically
when the sound is in Dolby TrueHD
format.
• OFF: Sound is not compressed.
Adjusting the bass and treble
level (BASS, TREBLE)
You can adjust the bass and treble level.
The parameters of “BASS” and “TREBLE”
range from “–6” to “+6” in 1-step increments.
• BASS:
Adjusts the bass level.
• TREBLE: Adjusts the treble level.
Adjusting the delay between
the sound and the image (A/V
SYNC)
You can delay the sound using this function
when the image is slower than the sound.
• ON:
Adjusts the difference between picture
and sound.
• OFF: No adjustment.
• You may not be able to adjust the delay between
sound and image perfectly using this function.
Enjoying multiplex broadcast
sound (DUAL MONO)
You can enjoy multiplex broadcast sound when
the system receives an AC-3 multiplex broadcast
signal.
• To receive an AC-3 signal, you need to connect a
digital satellite tuner to the system with an optical
cable or coaxial cable, and set the digital output mode
of the digital satellite tuner to AC-3.
• MAIN/SUB: Main sound is output from the
left speaker and sub sound is
output from the right speaker.
• MAIN: Plays back only the main
channel.
• SUB: Plays back only the sub channel.
Enjoying the sound at low
volume (NIGHT MODE)
You can enjoy sound effects and hear the dialog
clearly even at a low volume level using this
function.
• ON:
Turns on the “NIGHT MODE”
function.
• OFF: Turns off the function.
• You can listen to Dolby Digital sound at low volume
by using AUDIO DRC (page 37).
Minimizing volume variations
during playback (AUTO VOL)
Useful when there are sudden changes in the
sound volume, such as when the volume used in
commercials is louder than that of the
programme.
• ON:
Turns on the “AUTO VOL” function.
• OFF: Turns off the “AUTO VOL” function.
Note
Note
Tip
continued