HT-CT780
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2015.02
New
1.1
2015.04
Addition of Chinese, PX, African, Iranian, Saudi Arabia, UAE, Kuwait, Iraqi, Kenyan, Tanzanian,
Nigerian, Brazilian, Singapore and Taiwan models
Change of Part No. for TOP PANEL ASSY (Ref. No. 56)
Change of Part No. for INSTRUCTION MANUAL (US, Canadian, AEP, UK and Australian models)
(SMR-14050)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF
fi
le search function to
fi
nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note:
If you still see the original page, press the [Enter] key again.
Содержание HT-CT780
Страница 21: ...HT CT780 21 2 15 SERVICE POSITION MAIN board POWER board ...
Страница 77: ...MEMO HT CT780 77 ...