HSCU300RF/HSCU300R (GB) 4-479-632-
11
(1)
Specifications
General
Power supply
AC 100 to 240 V, 50/60 Hz
Current consumption
4.5 A (max)
Inrush current
(1) Maximum possible inrush current at initial switch-on (Voltage
changes caused by manual switching):
43 A peak, 5.5 A r.m.s. (240 V AC)
(2) Inrush current after a mains interruption of five seconds
(Voltage changes caused at zero-crossing):
2.9 A peak, 1.4 A r.m.s. (240 V AC)
Operating temperature
5 °C to 40 °C (41 °F to 104 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Weight
Approx. 6.7 kg (14 lb 12 oz) (HSCU300RF),
Approx. 7.9 kg (17 lb 6.7 oz) (HSCU300R)
Input/output connectors
CAMERA
HSCU300RF
Optical Fiber connector (1)
HSCU300R
Triax connector (1)
INTERCOM
XLR 5-pin (1)
INTERCOM/TALLY/PGM
D-sub 25-pin, female (1)
ˎ
INCOM (PROD/ENG), 4W/RTS/CC, 0 dBu
ˎ
TALLY (R, G)
ˎ
PGM 2-system, –20 dBu/0 dBu/+4 dBu
REMOTE
8-pin multiconnector (1)
MIC/WF REMOTE/TRUNK
D-sub 25-pin, female (1)
LAN
8-pin (1)
CAUTION
ˎ ˎ
ˎˎ
For safety, do not connect the connector for
peripheral device wiring that might have
excessive voltage to this port.
ˎˎ
When you connect the LAN connector
cable of the unit to peripheral device, use a
shielded-type cable to prevent malfunction
due to radiation noise.
Input connectors
AC IN
(1), AC 100 to 240 V
SDI RETURN 1, 2
BNC type (2)
HD SDI: SMPTE 292M, 0.8 Vp-p, 75 Ω,
1.485/1.4835 Gbps bit rate
SD SDI: SMPTE 259M, 270 Mbps bit rate
VBS RETURN 1, 2 BNC type (2), 1.0 Vp-p, 75 Ω
REFERENCE IN/OUT BNC type (2), loop-through output
HD: SMPTE 274M, tri-level sync, 0.6 Vp-p, 75 Ω
SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/PAL: 0.3 Vp-p, 75 Ω)
PROMPTER 1, 2
BNC type (2), VBS signal, 1.0 Vp-p, 75 Ω 2 systems
Output connectors
SDI OUTPUT 1, 2 BNC type (2)
HD SDI: SMPTE 292M, 0.8 Vp-p, 75 Ω,
1.485/1.4835 Gbps bit rate
SD SDI: SMPTE 259M, 0.8 Vp-p, 75 Ω, 270 Mbps bit rate
HD SDI/SD SDI selectable
SDI OUTPUT 3, 4 (MONITOR)
BNC type (2)
HD SDI: SMPTE 292M, 0.8 Vp-p, 75 Ω,
1.485/1.4835 Gbps bit rate
SD SDI: SMPTE 259M, 0.8 Vp-p, 75 Ω, 270 Mbps bit rate
HD SDI/SD SDI selectable
Pr/R/R-Y, Y/G/Y, Pb/B/B-Y
BNC type (3)
ˎ
HD component video
Y (100% white): 0.7 Vp-p
Pr/Pb (75% color bar): 0.7 Vp-p, 75 Ω
ˎ
HD RGB video
R/G/B (100% white): 0.7 Vp-p, 75 Ω
ˎ
SD RGB video
R/G/B (100% white): 0.7 Vp-p, 75 Ω
ˎ
SD component video
Y (100% white): 0.714 Vp-p
Pr/Pb (75% color bar): 0.756 Vp-p, 75 Ω
VBS1, VBS2
BNC type (2), VBS 1.0 Vp-p, 75 Ω
PIX
BNC type (1), VBS/R/G/B (VBS 1.0 Vp-p, 75 Ω)
SYNC/WF
BNC type (1)
ˎ
SYNC
HD: BTA-S001A, tri-level sync, 0.6 Vp-p, 75 Ω
SD: composite sync, 0.3 Vp-p, 75 Ω
HD SYNC/SD SYNC selectable
ˎ
WF
VBS/R/G/B/SEQ (VBS 1.0 Vp-p, 75 Ω)
MIC OUT
XLR 3-pin, male (2), 0 dBu / –20 dBu
Supplied accessories
Number plates (1 set)
Operation guide (1)
Operation manual (CD-ROM) (1)
Optional accessories
HKCU-FP2 CCU Control Panel
HZCU-MC3 Camera Operating Software
United States and Canada: Plug holder B (2-990-242-01)
Other areas: Plug holder C (3-613-640-01)
United States and Canada: Power cord set (1-551-812-XX)
Other areas: Power cord set (1-782-929-XX)
CCA-5-3 (3 m), CCA-5-10 (10 m) connection cables
Maintenance manual
(HSCU300RF only)
Connectors for optical/electric composite cables:
LEMO® PUW.3K.93C.TLCC96 (to the “CAMERA” connector on CCU)
ˎ
ˎ
LEMO® FUW.3K.93C.TLMC96 (to the “CCU” connector on CAMERA)
ˎ
ˎ
Caution on the optical/electric composite cable:
For connection between the camera control unit and a camera, be sure to use
an optical/electric signal composite cable with the connectors specified in this
manual in order to comply with the limit for EMC regulations.
Related equipment
HD color camera
HSC300RF, HSC300R, HSC-300
HSC100RF, HSC100R, HXC-100
RCP-1000-series Remote Control Panel
MSU-1000/1500 Master Setup Unit
VCS-700 Video Selector
CNU-700 Camera Command Network Unit
Dimensions
Design and specifications are subject to change without notice.
Notes
Always verify that the unit is operating properly before use. SONY WILL
ˎ
ˎ
NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF
PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY,
OR FOR ANY OTHER REASON WHATSOEVER.
SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF
ˎ
ˎ
THIS UNIT OR MADE BY THIRD PARTIES.
SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION
ˎ
ˎ
OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
395 mm (15
5
/
8
in)
66 mm
(2
5
/
8
in)
424 mm (16
3
/
4
in)
482 mm (19 in)
