22
Setup Menu
<MONITOR 2>
C04
LEVEL GATE
---, 1&2, 1, 2,
OFF
---: Displayed when camera not connected, video
output not set to CAMERA, or video output is set to
CAMERA and GATE MARKER is ON (read only)
Y LEVEL1
0 to 108%
49
61
Level gate 1 minimum and maximum detection levels
and zebra range settings
–99 to 99
–25
Y LEVEL2
0 to 108%
74
108
Level gate 2 minimum and maximum detection levels
and zebra range settings
–99 to 99
–25
GATE MARKER
---, ON,
OFF
Gate signal display on/off and signal level setting
---: Displayed when camera not connected (read only)
–99 to 99
0
MODULATION
---, ON,
OFF
4:3 aspect ratio mask function on/off when EDGE
CROP is ON, and mask video level setting
---: Displayed when camera not connected (read only)
–99 to 99
0
MARKER
ON,
OFF
Marker signal on/off and superimposed signal
selection
4:3
, 13:9, 14:9, EU VISTA, VISTA,
CINEMA, FOLLOW DC
<MIC/AUDIO>
C05
CAM MIC GAIN
(REMOTE), (LOCAL)
Camera microphone gain settings
(REMOTE): MIC REMOTE source
(LOCAL): Not MIC REMOTE source
CH1
---, 20, 30, 40, 50,
60
dB
Set to match the microphone used.
CH2
---, 20, 30, 40, 50,
60
dB
---: Displayed when camera not connected (read only)
MIC REMOTE
MIC 1&2, MIC 1.2
MIC REMOTE gain control method
MIC 1&2: MIC 1, 2 common gain control
MIC 1.2: MIC 1, 2 independent gain control
MIC OUT
DELAY
0
, 256, 512, 768, 1024, 1280,
1536, 1792, 2048, 2304, 2560,
2816, 3072, 3328, 3584, 3840FS
MIC OUT 1, 2 delay setting
(3584, 3840FS: HSCU300RF only)
MIC1 LEVEL
–20,
0
+4 dBu
MIC2 LEVEL
–20,
0
+4 dBu
<INTERCOM>
C06
CAMERA
(ENG/MIC ON), (---/MIC OFF),
(PROD/MIC ON)
Camera settings
SYSTEM I/F
CLEAR COM
, 4 WIRE, RTS
D-sub 25-pin intercom interface settings
TERMINATION
(OFF), ON,
OFF
200
Ω
, termination when 2WIRE is set to ON.
(OFF): When SYSTEM I/F is 4WIRE (read only)
PGM1 INPUT
–20,
0
, +4 dBu
PGM1 input level setting
PGM2 INPUT
–20,
0
, +4 dBu
PGM2 input level setting
Page name
Page No.
Item
Settings
Indication
