Sony HKCU-FP1, Руководство по обслуживанию

Страница: 19 / 296

1-11 (E)
HXCU-100
SY-364 Board
S801
S530 S531
S734 S731
S733 S730
9
8
7
6
5
4
3
2
1
L K J H G F E D C B A
SY-364 Board (SIDE A)
Ref.No. Name Bit Description Factory setting
S530 PROD SEL
_
Select an intercom system for the producer line.
4W:
4-wire system
RTS (CC): RTS or Clear-Com is selectable with
the CCU menu.
4W
S531 ENG SEL
_
Select an intercom system for the engineer line.
4W:
4-wire system
RTS (CC): RTS or Clear-Com is selectable with
the CCU menu.
4W
S730 R-TALLY
(POWER/CONTACT)
_
Set these switches in accordance with the speci fi -
cations for the R TALLY signal that is input to the
INTERCOM/TALLY/PGM connector on the rear
panel. For relationship of the signal and switch
settings, refer to the table below.
CONTACT
S733 R-TALLY
(POWER/TTL)
_
TTL
S731 G-TALLY
(POWER/CONTACT)
_
Set these switches in accordance with the speci fi -
cations for the G TALLY signal that is input to the
INTERCOM/TALLY/PGM connector on the rear
panel. For relationship of the signal and switch
settings, refer to the table below.
CONTACT
S734 G-TALLY
(POWER/ TTL)
_
TTL
S801 PROTECT 1 Used to protect data write to IC801. ON
VerUp 2 Used to enable software upgrade using a memory
stick. OFF
NORMAL/DEBUG 3 Not used OFF
NORMAL/DEBUG 4 Not used OFF
Tally System Settings
Ref.No. Red tally Green tally
S730
(POWER/ CONTACT) S733
(POWER/TTL) S731
(POWER/ CONTACT) S734
(POWER/TTL)
Contact supply CONTACT
_
CONTACT
_
24 V supply POWER POWER POWER POWER
5 V supply POWER TTL POWER TTL