Adjusting the Shoulder Pad Position / Connecting the Remote Control Unit
44
Cha
p
te
r 2
P
rep
ar
at
ions
You can shift the shoulder pad from its center
position (the factory default setting) backward by
up to 10 mm (3/8 inch) or forward by up to 25 mm
(1 inch). This adjustment helps you get the best
balance for shooting with the camcorder on your
shoulder.
1
Raise the lever in the center of the
shoulder pad to unlock the shoulder
pad.
2
Slide the shoulder pad backward or
forward until it is in the most
convenient position.
3
Bring down the lever to lock the
shoulder pad in the selected position.
Connecting the RM-B150/B750 Remote Control
Unit enables remote control of the principal
camera functions.
Connecting the remote control unit to the
REMOTE connector (8-pin) automatically puts
the camcorder into remote control mode. If you
disconnect the remote control unit, the remote
control mode is cancelled.
Camcorder switch functions when the
remote control unit is connected
The following switches on the camcorder do not
function.
• GAIN selector
• OUTPUT/DCC switch
• WHITE BAL switch
• AUTO W/B BAL switch
• SHUTTER selector
• ASSIGN 1/3/4/5 switches and RET button on
the lens to which the TURBO SWITCH
function is assigned
• REC START button (and the recording start/
stop buttons on the lens, and the ASSIGN 1/3/4/
5 switches and RET button on the lens to which
the recording start/stop function is assigned)
(when the RM REC START item on the CAM
Adjusting the Shoulder
Pad Position
1,3
2
Shoulder pad
Connecting the Remote
Control Unit
1
2
3
1
RM-B150/B750
2
Remote control cable
3
REMOTE connector