5(E)
qk
FAN STOP button
When ambient temperature is high, the fan
qg
automatically operates. When this happens, the fan can
be turned off for about 5 minutes by pressing this
button.
Note
If excessive heat keeps building up inside the unit, the
life of the unit may be shortened. When the fan
operation resumes 5 minutes after the FAN STOP
button has been pressed, do not press the button again
for at least 2 minutes.
ql
R/G TALLY LOWER (lower red/green tally
lamps) selector
Used to select the red tally lamps
8
and the green
tally lamp
qd
lighting up according to the input of tally
signals.
ON: All red and green tally lamps light up.
OFF: Only the red tally lamps and the green tally
lamp at the upper part of the viewfinder light up.
w;
R/G TALLY LEVEL (red/green tally lamps
brightness) selector
Used to adjust the brightness of the red tally lamps
8
and the green tally lamps
qd
.
H: Light brighter.
M: Light normally.
L: Light dimly.
wa
DIMMER (external tally lamp) control
Used to adjust the brightness of the external tally lamp
qf
. Use a screwdriver to turn the control clockwise to
increase the brightness, or counterclockwise to
decrease the brightness.
